LEARNING OUTCOMES
The Student Will
|
| | |
C | 1 | Describe the configurations and technologies associated with Wide Area Networks and explain the role of a router in a WAN |
|
C | 2 | Describe TCP operation, including windowing and transport layer ports, and compare MAC and IP addresses and port numbers |
|
A | 3 | Describe static and dynamic routing and configure and troubleshoot various distance vector protocols |
|
A | 4 | Describe ICMP operation, identify the various TCP/IP control messages and demonstrate their application |
|
C | 5 | Identify the major internal and external components of a router, describe the associated functionality and the purpose of the IOS, and demonstrate its fundamental operation |
|
P | 6 | Demonstrate IOS and configuration file management and configure the router |
|
P | 7 | Explain the purpose and application of ACLs and demonstrate their use |
|
P | 8 | Complete a case study on Routing, as prescribed by Cisco |
|
|
| | |
> | A description of TCP operation, including windowing and window size and the transport layer ports will include: |
|
| - | The interaction and delivery of application layer data |
|
| - | Synchronization or 3-way handshake |
|
| - | UDP operation |
|
| - | Denial of service attacks |
|
| - | Sequencing numbers and positive ACK |
|
|
|
> | A comparison of MAC and IP addresses and port numbers will include: |
|
| - | Multiple conversations and examples of multiple sessions between hosts |
|
| - | Ports for services and clients |
|
| - | Well-known port numbers |
|
|
| | |
> | A description of static and dynamic routing and various routing protocols will include: |
|
| - | Operation configuration and verification of static routes |
|
| - | Configuring default route forwarding |
|
| - | Purpose of routing protocols and autonomous systems |
|
| - | Identifying the classes of routing protocols |
|
| - | Distance vector and link-state routing protocol features |
|
| - | IGP versus EGP |
|
|
|
> | Configuring and troubleshooting the RIP and IGRP distance vector protocols includes: |
|
| - | Distance vector routing updates |
|
| - | Loop issues |
|
| - | Defining a maximum hop count |
|
| - | Eliminating routing loops utilising split horizon |
|
| - | Route poisoning |
|
| - | Avoiding routing loops with triggered updates |
|
| - | Preventing routing loops with holddown timers |
|
| - | Configuring, verifying and troubleshooting RIP including: |
|
| | - Using the IP classless command |
|
| | - Load balancing |
|
| | - Integrating static routes |
|
| | - Preventing routing updates through an interface |
|
| - | Configuring, verifying and troubleshooting IGRP including: |
|
| | - Metrics |
|
| | - Routes |
|
| | - Stability features |
|
| | - Migrating RIP to IGRP |
|
|
| | |
> | A description of ICMP operation and error messages will include: |
|
| - | Error reporting and error correction |
|
| - | Testing for Destination reachability |
|
| - | Destination unreachable |
|
| - | Address mask requirements |
|
| - | Clock synchronisation and transit time estimation |
|
|
|
> | And optionally, identification of TCP/IP control messages including: |
|
| - | Message delivery |
|
| - | Echo Request/Reply |
|
| - | Clock synchronisation and transit time |
|
| - | Address mask |
|
| - | Information requests and reply message formats |
|
| - | Congestion and flow control |
|
| - | Router discovery and solicitation |
|
| - | ICMP redirect/change requests |
|
|
|
> | Demonstrating the various TCP/IP control messages will involve: |
|
| - | Using ping to test destination reachability |
|
| - | Detecting excessively long routes |
|
|
| | |
> | Identifying the major internal and external router components includes: |
|
| - | IOS software features and operation |
|
| - | Router user interface and interface modes |
|
|
|
> | A description of the associated router functionality includes: |
|
| - | Importance of configuration standards |
|
| - | Interface descriptions |
|
|
|
> | The description of the router IOS and demonstration of its fundamental operation includes: |
|
| - | IOS file system overview and naming conventions |
|
| - | Stages of the power-on boot sequence |
|
| - | Locating and loading IOS |
|
| - | Configuration register |
|
| - | Environmental variables |
|
| - | Router IOS functionality including: |
|
| | - Initialisation |
|
| | - LED indicators |
|
| | - Examining the initial bootup |
|
| | - Establishing a HyperTerminal session |
|
| | - Logging in and CLI keyboard help |
|
| | - Enhanced editing commands |
|
| | - Command history |
|
| | - Troubleshooting command line errors |
|
| | - Show version command |
|
|
| | |
> | A demonstration of router configuration, including the IOS and configuration file management includes: |
|
| - | Connectivity for: |
|
| | - Configuring the router |
|
| | - Network interconnection |
|
| - | Router boot sequence and verification: |
|
| | - Using the boot system command |
|
| | - Trouble shooting IOS boot failure |
|
| - | Managing configuration files and IOS images using: |
|
| | - TFTP |
|
| | - Copy and paste |
|
| | - Xmodem |
|
| | - Verification of system files |
|
| - | Command Line Interface (CLI) command modes |
|
| - | Configuring router name and password |
|
| - | Examining the show commands |
|
| - | Configuring serial and Ethernet interfaces |
|
| - | Executing adds, moves and changes |
|
| - | Configuring: |
|
| | - Interface descriptions |
|
| | - Message-of-the-day |
|
| | - Host tables |
|
| | - Backup and documentation |
|
| - | Host name resolution |
|
| - | Login banners |
|
| - | Copying, editing and pasting configurations |
|
| - | Utilising the Cisco Discovery Protocol (CDP) including: |
|
| | - Implementation, monitoring and maintenance of CDP |
|
| | - Creating a network map of the environment |
|
| | - Disabling and troubleshooting CDP |
|
| - | Getting information about remote devices including: |
|
| | - Establishing and verifying a Telnet session |
|
| | - Disconnecting and suspending Telnet sessions |
|
| | - Advanced Telnet operation |
|
| | - Alternative connectivity tests |
|
| | - Troubleshooting IP addressing issues |
|
| - | Router troubleshooting including: |
|
| | - Examining the router table to determine the administrative distance, route metric and next hop, and the last routing update |
|
| | - Using a structured (layered) approach to network testing comprising visual indicators and the application of the ping and Telnet commands |
|
| | - The use of various commands; i.e. show interface and show CDP, traceroute and debug |
|
|
| | |
> | The purpose and application of ACLs will be explained in terms of: |
|
| - | Their operation |
|
| - | Creation and verification of ACLs |
|
| - | Function of the wildcard mask |
|
|
|
> | A demonstration of their use will include: |
|
| - | Application of packet control |
|
| - | Configuring, implementing and analysing ACLs within a router configuration including: |
|
| | - Standard and extended ACLs |
|
| | - Named ACLs |
|
| | - Placing ACLs |
|
| - | And optionally: |
|
| | - Firewalls |
|
| | - Restricting virtual terminal access |
|
|